5.6.5
"5 Security"
5.6.5.1
"5.1 Active / inactive"
Factory setting:
Setting range:
Purpose:
Description:
5.6.5.2
"5.2 PIN input"
Factory setting:
Setting range:
Purpose:
Description:
5.6.5.3
"5.3 Change PIN"
Factory setting:
Setting range:
Purpose:
Description:
SITRANS TF280 WirelessHART
Operating Instructions, 10/2010, A5E02619566-02
Inactive
Active
Inactive
Activate/deactivate PIN input as security function
If you activate this function, certain parameters and functions can only be
set or executed following input of a PIN.
-
-
Enter master pin
Unlock device
Unlocking of device following loss of PIN. You can obtain the required
master pin from the Siemens Hotline. Keep ready the information from the
nameplate.
Additional information is available in Chapter Troubleshooting/FAQs
(Page 81)
0000
0000 ... 9999
Change factory-set PIN "4711"
Define own PIN
Your own PIN overwrites the factory-set PIN "4711". If you forget your own
PIN, you must unlock the device using the master PIN, see "5.2 PIN input"
(Page 57)
Enter your own PIN using the ↑ or ↓
keys. Confirm input using the M key.
Operation
5.6 Parameter descriptions
57