Zenith Hydroboil Series Installation And Operating Instructions Manual page 17

6. PIN PROTECTION
Zenith Hydroboil comes with a security PIN protection feature
which when enabled can prevent settings from being changed
or install functions from being performed.
To enable the PIN protection, from the home screen touch the
button.
The following main menu will be shown.
From the main menu above, touch
lowing page.
To enable PIN protection, touch
Enter your PIN from the screen above then touch
804546NZ - BW_HB Small_09.18 v1.02
Menu Operation
[Security] for the fol-
[Enable].
.
As prompted, re-enter the PIN from the screen below then
touch again.
The following screen will be shown once PIN protection has
been turned on.
Touch [Change Pin] or touch
PIN protection.
Follow the prompts to reset the PIN or disable PIN protection.
If you misplace your PIN, the "master code" can be used to
reset your PIN.
The factory default master code is "7395".
There is a high security option in the service menu that allows
the master code to be disabled. Contact Zenith to enable this
feature.
[Disabled] to turn off
Page 17 of 24