Dimensions; Standard (Without An Electromagnetic Brake) - Mitsubishi Electric Melservo-Jet HG-SNS Series User Manual

6.7

Dimensions

• When running the cables to the load side, take care to avoid interference with the machine.
• Not all parts are created the exact same size or assembled in precisely the same manner. Therefore, the actual dimensions
of rotary servo motors may be a maximum of approximately 3 mm larger than those in the drawings. In addition, the
described dimensions and dimensional tolerances are the values at 20 °C. Since the values of the dimensions may vary
depending on the ambient temperature, allow some margin when designing the machine side.
• Use a friction coupling for coupling the servo motor with a load.
• Use hexagon socket head cap screws to mount the rotary servo motor.

Standard (without an electromagnetic brake)

With oil seal
■HG-KNS13J
□43
13.7 4.9
27.4
POWER POWER
1
No. Signal
2
(PE)
1
3
2 U
4
3 V
4 W
Connector pin assignment
Servo motor flange direction →
[Unit: mm]
6 HG-KNS SERIES
68
6.7 Dimensions
Encoder connector
10.9 11.7
11.7 21.7
89 25
5 2.5
21.5
Oil seal
9.9
18.6
47.8
Power connector
21.7
□40
2-φ4.5
13.9 6.4
27.5
18.6
Opposite-load side
BC69224*