Table of Contents
Advertisement
3
Press TUNING 4 ¢ (on the remote
control 4 ¢) to select a desired track.
The album number will change accordingly as
you reach the first track of an album by pressing
4 or the last track of an album by pressing
¢.
4
Press PLAY/PAUSE 2; (on the remote
control 2;) to start playback.
During playback, press DISPLAY/BAND to
show the album and track numbers.
Supported MP3 disc formats:
– ISO9660, Joliet, UDF 1.5
– Maximum title number: 999 (depending on
filename length)
– Maximum album number: 99
– Supported sampling frequencies: 32 kHz, 44.1
kHz, 48 kHz
– Supported Bit-rates: 32~256 (kbps), variable
bitrates
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The play
modes can also be combined with
PROGRAMME.
SHUFFLE ......... tracks of the entire disc are
played in random order
REPEAT ALL ... repeats the entire disc/
programme
REPEAT ............ plays the current track
continuously
REPEAT ALB ... repeats all tracks in the current
(for MP3 only) album
1
To select your play mode, press the SHUFFLE
or REPEAT button before or during playback
until the display shows the desired function.
2
Press PLAY/PAUSE 2; (on the remote
control 2;) to start playback if in the STOP
position.
If you have selected SHUFFLE, playback starts
automatically.
CD/MP3 Operation
3
To return to normal playback, press the
respective SHUFFLE or REPEAT button until
the various SHUFFLE/ REPEAT modes are no
longer displayed.
You can also press STOP 9 to cancel your play
mode.
Note:
– The SHUFFLE and REPEAT functions cannot be
used simultaneously.
Programming track numbers
Programme in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
20 (10 for MP3 disc) tracks can be stored in the
memory.
1
Use the TUNING 4 ¢ (on the remote
control 4 ¢) to select your desired track
number.
2
Press PROGRAM to store.
The number of tracks programmed and
PROG are shown briefly, then the selected track
number.
3
Repeat steps 1-2 to select and store all desired
tracks.
FULL is displayed if you attempt to
programme more than 20 (10 for MP3 disc)
tracks.
4
To start playback of your disc programme, press
PLAY/PAUSE 2; (on the remote control
2;).
Reviewing the programme
Stop playback and press PROGRAM
repeatedly.
To exit review mode, press Ç.
Erasing the programme
You can erase the programme by:
pressing STOP 9 once in the STOP mode;
pressing STOP 9 twice during playback;
opening the CD compartment;
disappears from the display.
PROG
13
Advertisement
Table of Contents
