Sensor S0 is blocked
Sensor S0 is blocked
Introduction
Symbol
The error occurs, if the sensor S0 is blocked by paper at booting phase.
Procedure
1. At first use the purge function. See
2. If purge does not work perfectly, open the bridge.
74
Chapter 8 - Trouble shooting
Type of symbol
Indicates
CAUTION
In order to guarantee hazard-free operations it is strongly rec-
ommended that any maintenance or repair work is only car-
ried out by trained personnel. Ignoring this warning could
cause injury or damage to property.
How to use the purge function on page
69.