Table of Contents
Advertisement
INSERTING THE BATTERY PACK
This digital camera uses one DB-L30 lithium-ion battery pack. Before using
the battery pack, read the safety warnings on page 15 of this manual. When
replacing the battery pack, the camera should be turned off (page 33).
1
3
1
Slide the battery chamber door toward the front of the camera to
release the safety catch. Open the door.
2
Slide the battery pack into the battery chamber with the battery pack
terminals first.
3
Close the battery chamber door and slide it toward the back of the
camera to engage the safety catch.
After installing the battery pack, the set-time/date message may appear on
the monitor.
See page 34 on how to set the clock. An internal battery pack protects the
clock, calendar, and memory settings for more than 24 hours if the camera is
used for at least 5 minutes before removing the battery pack.
2
To remove the battery pack...
2 Pull out
1 Open
30
English
Advertisement
Table of Contents
