Install The Battery Pack - Sanyo VPC-X1250 Instruction Manual

SHOOT, PLAY BACK AND SAVE

Install the battery pack

1
Use the supplied charger to charge the battery pack.
h The CHARGE indicator is lit during charging.
h The CHARGE indicator will turn off when the battery pack is fully charged.
h Charging takes approximately 120 min.
2
Open the battery/card compartment cover, and insert the battery pack.
h The battery/card compartment cover is located on the bottom of the
camera.
h Press the ON/OFF button to turn the camera on.
[o] mark
Battery pack charger
Battery pack
[o] mark
CHARGE indicator
To power outlet
ON/OFF button
vi
English