Product Storage - Navien Mate EQM 350 User Manual

Product Storage

How to Manually Drain the Product
Make sure that the water in the heating unit and the pad has sufficiently cooled before
draining to prevent risk of burn.
If the water has not been replaced for a long time, the mineral or other solids in the water may solidify to
create scale.
How to drain the heating unit
Prepare a bucket or bowl to receive the water. (approx. 1.8L)
Remove the hose by pressing the easy connector connected to the water-inlet/water-outlet
connector at the rear of the heating unit.
Remove the water inlet cap by turning it counterclockwise.
Tilt the heating unit to remove the water inside and empty the heating unit.
To remove the remaining water from the water-inlet/outlet connector of the heating unit,
press the protruding part of the connector to extract the remaining water.
Air dry sufficiently with the water inlet cap open in a shaded area.
How to drain the mattress pad
Prepare a bucket or bowl to receive water from the pad. (approx. 1.8L)
Hold the end of the hose and connect the water removal kit provided at the time of
purchase.
Fold the pad to remove the residual water inside, or insert the included air pump into the
center of the residual water removal kit and pump slowly to remove the residual water.
2
1
1
15