Mounting The Din Rail Bracket On The Device; Attaching The Bracket Onto The Din Rail - Cisco IR1101 Hardware Installation Manual

Installing the IRM-1100 Expansion Module

Mounting the DIN Rail Bracket on the Device

Step 1 First, attach the DIN rail brackets to the back of the Device. There are two separate mounting brackets. One attaches to
the IR1101, and the other attaches to the IRM-1100. The combined DIN rail brackets mount in the vertical orientation
only. See Figure 35: Attaching the DIN Rail Brackets, on page
Figure 35: Attaching the DIN Rail Brackets
Step 2 Attach the IR1101 DIN mounting bracket (1) to the Device using the two screws (3) provided in the kit. Position the
bracket over the two mounting holes, then use 13-15 in. lbs. (1.5-1.7 newton meter) of torque to screw the bracket onto
the Device.
Step 3 Attach the IRM-1100 DIN mounting bracket (2) to the Device using the screw (4) provided in the kit. Position the bracket
over the single mounting hole, then use 13-15 in. lbs. (1.5-1.7 newton meter) of torque to screw the bracket onto the
Device.
Step 4
Once the two brackets are attached to the Device, it can be mounted onto the DIN Rail.

Attaching the Bracket Onto the DIN Rail

To attach the Device with the brackets to a DIN rail, follow these steps. Refer to
Brackets to the DIN Rail, on page 60
59.
for details.
IR1101 Industrial Integrated Services Router Hardware Installation Guide
Mounting the DIN Rail Bracket on the Device
Figure 36: Attaching the
59