Cisco IR1101 Hardware Installation Manual page 62

Mounting the Device Using Mounting Brackets
Figure 31: Mounting Brackets
Step 2 Align the mounting brackets (1) over the mounting holes (3) so that the larger holes on the brackets extend out over the
Device.
Step 3 Attach the brackets to the Device with the 4 screws (2) provided using a Phillips head driver. Torque to 13-15 in. lbs
(1.5-1.7 newton meter).
Step 4 Mount the Device with the attached brackets in a proper wall structure to carry the weight of the device, which is a
combined 3.85 lbs. See
and Figure 33: Wall/Floor mounting clearance and overall dimensions with mounting brackets attached, on page 58
the dimensions of the mounting holes with the brackets attached to the Device.
IR1101 Industrial Integrated Services Router Hardware Installation Guide
56
Figure 32: Wall/Floor mounting hole dimensions with mounting brackets attached, on page 57
Installing the IRM-1100 Expansion Module
for