Philips HQ8882 Instructions For Use Manual page 8

ENGLISH
10
C
2
1
C
Every six months: shaving heads
1 Open the shaving unit, turn the wheel
anticlockwise (1) and remove the retaining
frame (2).
2 Clean the cutters and guards with the
brush supplied.
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving
performance is restored.
3 Put the shaving heads back into the shaving
unit. Put the retaining frame back into the
shaving unit, press the wheel (1) and turn it
clockwise (2).
4 Close the shaving unit.
Trimmer
Clean the trimmer every time you have used it.
1 Switch the shaver off, remove the
powerplug from the wall socket and pull
the appliance plug out of the shaver.
2 Clean the trimmer with the brush
supplied.