IBM 5147-024 Manual page 32

Figure 15. Mode 1 connection of two ESLL and ESLS storage enclosures by using YO12 cables to a single FC EJ0J
or FC EJ0M SAS adapter
16. Complete a mode 1 connection of one enclosure (A) by using YO12 cables (B) to an FC EJ0L SAS
adapter pair or an FC EJ14 SAS adapter pair (C) with adapter-to-adapter (AA) cables (D), as shown
in Figure 16 on page 17, and then continue with "Connecting cables, power cords, and installing
covers" on page 22.
Notes:
v Each adapter in the SAS adapter pair (C) has access to the other adapter and to all 12 or 24 drive
bays.
v For SAS adapter pairs, you must attach the cables to the same port on both adapters.
v Both short legs of the cables must attach to the same side of the enclosure and both long legs of
the cable must attach to the other side of the enclosure.
16
Power Systems: Installing the Model 024, ESLL, or ESLS storage enclosure