Secure Vpn Connection With Ca Certificate; Loading A Certificate - Siemens SCALANCE M-800 Series Getting Started

5.4.2

Secure VPN connection with CA certificate

5.4.2.1

Loading a certificate

Requirement
● The correct time is set on the M874 and the SINEMA RC Server.
● On PC1/2 there are two Web browser windows open.
● Web browser 1:
You are logged in as the "admin" user to the WBM of the M874.
● Web browser 2:
You are logged on to the WBM of the SINEMA RC Server as the user "admin".
Procedure
1. Change to Web browser 2.
– In the address box of the Web browser, enter the WAN IP address of the SINEMA RC
– Log in as the "admin" user and the corresponding password.
– Click "Security" > "Certificates" in the navigation area.
– Click on the
2. Change to Web browser 1.
– In the address box of the Web browser, enter the LAN IP address of the M874, see
– Log in as the "admin" user and with the corresponding password.
– Click on "System" > "Load & Save" in the navigation area and on the "HTTP" tab in the
– Click the "Load" button next to "X509Cert". The dialog for loading a file is opened.
– Navigate to the exported server certificate. Click the "Open" button in the dialog.
SCALANCE M-800 Getting Started
Getting Started, 06/2015, C79000-G8976-C337-04
VPN tunnel between SCALANCE M87x and SINEMA RC Server
Server, see table "Settings used (Page 181)".
symbol in "Actions" to export the certificate.
table "Settings used (Page 181)".
content area.
The file is now loaded on the device. After loading successfully, confirm the next
dialog with "OK".
5.4 Configuring a remote connection on the M87x
197