Description
Machine design
The regulations and standards used as basis for designing and testing this machine are
stamped on the rating plate. The machine design basically complies with the subsequent
standards: Please refer to the EU Declaration of Conformity for the versions of the harmonized
standards referenced.
Table 3-1
Feature
Dimensions and operation characteristics
Degree of protection
Cooling
Type of construction
Terminal markings and direction of rotation
Noise emission
Mechanical vibrations
IEC‑standard voltages
Vibration limit values
See also
Quality documents (Page 121)
Rating plate
The rating plate shows the identification data and the most important technical data. The data
on the rating plate and the contractual agreements define the limits of proper usage.
22
Machine design
Standard
IEC / EN 60034-1
IEC / EN 60034-5
IEC / EN 60034-6
IEC / EN 60034-7
IEC/EN 60034-8
IEC / EN 60034-9
IEC / EN 60034-14
IEC/DIN IEC 60038
DIN ISO 10816-3
SIMOTICS HT Series HT-direct 1FW4...1......A
Operating Instructions 11/2018