Inserting And Routing The Cables; Circuit Diagram; Figure 6-3 Neutral Point Connection - Siemens SIMOTICS HT Series Operating Instructions & Installation Instructions

Electrical connection

6.4 Inserting and routing the cables

6.4 Inserting and routing the cables
6.4.1

Circuit diagram

For the machine, the neutral point is formed internally. A separate neutral point circuit must
not therefore be wired in the main terminal box by the servicing or commissioning personnel.
Figure 6-3
Data on the connection and connecting the motor winding can be found in the circuit diagram
in the cover of the terminal box.
68
Neutral point connection
SIMOTICS HT Series HT-direct 1FW4...1......A
Operating Instructions 11/2018