Table of Contents
Advertisement
Personal protective measures
● Ensure that you never wear or carry any of the following objects and that they are kept a
● Do not use any magnetic tools or lifting devices.
● Wear only occupational safety items without magnetic metal parts, e.g. occupational safety
● Keep your shoes and clothing free from chips and waste containing iron.
● Exercise caution when installing accessories. Ensure that no parts fall into the inside of the
● Do not perform any cutting at the machine, e.g. manufacturing threaded holes. Any
11.6
Disposing of permanent magnets
If the entire motor is melted down, no special action is required for the permanent magnets.
Remove all cables before the melting process.
Demagnetizing the motor
If the motor is disassembled and dismantled, the permanent magnets must be demagnetized.
To do this, the motor is heated up to 350 °C so that during and after disposal, the rotors do
not represent any danger. The disposal must be carried out by an authorized waste disposal
company.
Note
Removing the permanent magnet rotor
Injury and material damage can occur if the permanent magnet rotor is incorrectly removed.
Only authorized workshops and waste disposal companies are permitted to remove the rotor.
SIMOTICS HT Series HT-direct 1FW4...1......A
Operating Instructions 11/2018
safe distance from the machine:
– All kinds of magnetic metal parts such as, keys, glasses, tools, knives, scissors, tape
measures, etc.
– Magnetic jewelry such as rings, chains, needles, watches, etc.
– Electronic devices and data carriers such as service cards, check cards, credit cards,
calculators, cell phones, etc.
– Wallets or other iron-containing objects
– Electrically conductive foreign bodies
shoes with non-magnetic protective caps and soles.
machine.
exceptions require written approval from the manufacturer.
11.6 Disposing of permanent magnets
Disposal
113
Advertisement
Table of Contents
