Optional: Connecting To A Multi-Channel Receiver; Receiver Has A Dolby Digital Or Dts Decoder; Optional : Connecting To An Audio System; Stereo System Has Dolby Pro Logic Or Right / Left Audio In Jack - Philips DVP720SA/05 User Manual

Connections
Optional: Connecting to a Multi-
channel Receiver
AV Receiver
Y
Pr Pb
TV OUT
Receiver has a Dolby Digital or DTS
decoder
1
Select one of the video connections
(CVBS VIDEO IN, S-VIDEO IN, SCART or
COMPONENT VIDEO IN) depending on
the options available on your TV.
2
Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input sockets on your
Receiver (cable not supplied).
3
Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your Receiver
(cable not supplied).
4
Set the DVD Player's Analog Output to
'Multichannel' to enable playback of DVDs
recorded in Multi-channel. (see page 29
"Setting the analogue output").
Helpful Hint:
– If the subwoofer is equipped with its own
amplifier, the Subwoofer connection should
be connected directly to the subwoofer.
12
01-40 DVP720_EU_051
MULTICHANNEL AUDIO IN
FRONT CENTER REAR
R R
L L
FRONT SUBW. REAR
CENTRE
L L L
R R R
SUB-
STEREO FRONT REAR
WOOFER
1
2
12
Optional: Connecting to an
Audio System
STEREO
Y
L L
R R
Pb
TV OUT STEREO
FRONT
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
Select one of the video connections
(CVBS VIDEO IN, S-VIDEO IN, SCART or
COMPONENT VIDEO IN) depending on
the options available on your TV.
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable not supplied).
3/08/2004, 4:43 PM
OPTICAL
AUDIO
IN
DIGITAL
CENTRE
L
R
SUB-
REAR
WOOFER
3139 246 13543