Setting The Analogue Output; Speaker Setup; Cd Upsampling - Philips DVP720SA/05 User Manual

Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜
Off: Turn off the digital output.
➜
All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
Helpful Hints:
– If DIGITAL OUTPUT is set to 'All', all
audio settings except MUTE are invalid.
– You cannot hear or record the SACD
playback if you use the digital connection.
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM Output'.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
➜
48kHz: Playback a disc recorded at the
sampling rate of 48kHz.
➜
96kHz: Playback a disc recorded at the
sampling rate of 96kHz that can only be
achieved in Stereo-Classic[Flat] mode.
Helpful Hint:
– LPCM Output can be selected only when
PCM Only is activated.

Setting the analogue output

Set Analogue Output to match your DVD
Player's playback capability. This function
can also be accessed via the
SURROUND button on the remote.
1
In 'AUDIO SETUP PAGE', press 34 to
highlight {ANALOG OUTPUT}, then
press 2.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press
01-40 DVP720_EU_051
DVD Setup Menu Options
STEREO
Select this to change channel output to
stereo which delivers sound from only the
two front speakers and subwoofer.
MULTI-CHANNEL
Select this to enable Multi-channel output.
2
Press 34 to select a setting, then press
OK to confirm your selection.

Speaker Setup

This menu contains setup options for
your audio output which makes the
speaker setup system reproduce high
quality surround sound. For details, see
page 19.

CD Upsampling

This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. If you have activated
the upsampling, the player will
automatically switch to stereo mode.
1
In 'AUDIO SETUP PAGE', press 34 to
highlight {CD UPSAMPLING}, then press
2.
OFF
Select this to disable CD-upsampling.
88.2 kHz (X2)
Select this to convert the sampling rate of
the CDs twice higher than the original.
176.4 kHz (X4)
Select this to convert the sampling rate of
the CDs four times higher than the
original.
2
Press 34 to select a setting, then press
OK to confirm your selection.
Helpful Hint:
– CD upsampling feature is only applicable
to stereo output setting.
SYSTEM MENU
29
.
3139 246 13543
3/08/2004, 4:44 PM
29