Connecting The Power Cord; Optional: Connecting To A Multi-Channel Receiver; Receiver Has A Dolby Digital Or Dts Decoder - Philips DVP5505S/00 User Manual

Connecting the power cord

COMPONENT
VIDEO IN
S-VIDEO
IN
AUDIO V (Pr/Cr)
OUT
~ AC MAINS
U (Pb/Cb)
VIDEO IN
Y
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded, press
STANDBY ON on the DVD Player
front panel,
"NO DISC" may appear on the
display panel.
NO DISC
01-41 DVP5505S_EU_008
Optional: Connecting to a Multi-
channel Receiver
AV Receiver
Receiver has a Dolby Digital or DTS
decoder
1
Select one of the video connections
(CVBS VIDEO IN, S-VIDEO IN, SCART or
COMPONENT VIDEO IN) depending on
the options available on your TV.
2
Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input sockets on your
Receiver (cable not supplied).
3
Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your Receiver
(cable not supplied).
4
Set the DVD Player's Analog Output to
'Multichannel' to enable playback of DVDs
recorded in Multi-channel. (see page 28
"Setting the analogue output").
Helpful Hint:
– If the subwoofer is equipped with its own
amplifier, the Subwoofer connection should
be connected directly to the subwoofer.
11
Connections
MULTICHANNEL AUDIO IN
FRONT REAR CENTER
R R
L L
FRONT REAR SUBW.
8239 300 34351
20/01/2005, 4:49 PM
11