Optional: Connecting To A Multi-Channel Receiver; Receiver Has A Dolby Digital Decoder; Optional: Connecting To An Audio System; Stereo System Has Dolby Pro Logic Or Right / Left Audio In Jack - Philips DVP3007/94 User Manual

Optional: Connecting to a Multi-
channel Receiver
AV Receiver
Receiver has a Dolby Digital
decoder
1
Select one of the video connections
(CVBS VIDEO IN, S-VIDEO IN, SCART
or COMPONENT VIDEO IN) depending
on the options available on your TV.
2
Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input sockets on your
Receiver (cable not supplied).
3
Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your Receiver
(cable not supplied).
4
Set the DVD Player's Analog Output to
'Multichannel' to enable playback of DVDs
recorded in Multi-channel. (see page 26
"Setting the analogue output").
Helpful Hint:
– If the subwoofer is equipped with its own
amplifier, the Subwoofer connection should
be connected directly to the subwoofer.
DVP3007_94(eng)
MULTICHANNEL AUDIO IN
FRONT REAR CENTER
R R
L L
FRONT REAR SUBW.
1
2
9
Connections
Optional: Connecting to an
Audio System
STEREO
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
Select one of the video connections
(CVBS VIDEO IN, SCART or
COMPONENT VIDEO IN) depending on
the options available on your TV.
Use the audio cables (white/red) to
connect [FRONT (L/R)] jacks of the DVD
Player to the corresponding AUDIO IN
jacks on the stereo system (cable
supplied).
4/26/05, 11:05 AM
AUDIO
IN
DIGITAL
9