Festool T 18+3 Li Original Operating Manual page 12

T 18+3 Li
f. Do not expose a battery to fire or excessive
temperatures. Fire or temperatures exceeding
130 °C may cause an explosion.
g. Follow all instructions on charging and never
charge the battery or the cordless tool outside
the temperature range stated in the operating
instructions. Incorrect charging or charging
outside the permitted temperature range can
destroy the battery and increase the risk of fire.
6 SERVICE
a. Only ever have your power tool repaired by
qualified specialist staff and always use origi-
nal spare parts. This ensures that the safety of
the power tool is maintained.
b. Never perform maintenance on damaged bat-
teries. Maintenance on batteries should only
ever be performed by the manufacturer or
authorised customer service centres.
c. Only use original parts for repairs and main-
tenance. The use of incompatible accessories
or spare parts can result in electric shocks or
other injuries.
2.2 Machine-specific safety notices for cord-
less drills
– Hold power tool by insulated gripping surfaces,
when performing an operation where the
cutting accessory or fastener may contact
hidden wiring. Cutting accessory or fasteners
contacting a "live" wire may make exposed
metal parts of the power tool "live" and could
give the operator an electric shock.
– Use suitable detectors to determine if utility
lines are hidden in the work area or call
the local utility company for assistance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line causes
property damage or may cause an electric
shock.
– Wear suitable protection: such as ear protec-
tion, safety goggles, a dust mask for work
which generates dust, and protective gloves
when working with raw materials and when
changing tools.
CAUTION! Power tool can block and
cause sudden kickback! Switch off im-
mediately!
12
– Hold the power tool firmly in your hand. Adjust
the torque correctly for screwing. Be prepared
for a high reaction torque, which may cause the
power tool to turn and possibly lead to injury.
– Do not use the power tool in the rain or in damp
surroundings. Moisture in the power tool may
cause a short circuit and burning.
– Do not lock the ON/OFF switch permanently!
2.3 Emission levels
Levels determined in accordance with EN 60745
are typically:
Sound pressure level
Sound power level
Uncertainty
Wear ear protection!
Vibration emission value a
three directions) and uncertainty K measured in
accordance with EN 60745:
Drilling in metal
Fastening
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise loads
during operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with
other insertion tools or if not maintained
adequately. Take note of idling and downtimes of
machine!
3 Intended use
Cordless drill suitable
– for drilling in metal, wood, plastics and similar
materials,
– for screwing in and tightening screws,
– use with Festool Batteries BPC and BPS of the
same voltage.
The user is liable for improper or non-
intended use; this also includes continu-
ous industrial operation.
L = 65 dB(A)
PA
L = 76 dB(A)
WA
K = 3 dB
(vector sum for
h
a =2.5 m/s
2
h
K = 1.5 m/s
2
a < 2.5 m/s
2
h
K = 1.5 m/s
2