Cisco ACS-7100-RMK Installing Manual page 18

Installing and Using PC Cards
Figure 15
Step 4
Step 5
Step 6
18 Installing Field-Replaceable Units in Cisco 7100 Series VPN Routers
Installing and Ejecting a PC Card
Back label
(faces up)
a
Front label
(faces down)
b
c
Insert the PC Card into PC Card slot 0 or slot 1 until the disk completely seats in the
connector at the back of the slot and the eject button pops out toward you. (See Figure 15,
parts a and b.) (The Flash Disk does not insert all the way inside the PC Card slot; a
portion of the disk remains outside of the slot. Do not attempt to force the disk past this
point.)
To eject a PC Card, lift the protective cover and press the appropriate ejector button until
the disk is free of the connector at the back of the PC Card slot. (See Figure 15, part c.)
Remove the PC Card from the slot and place it in an antistatic bag.
Slot 0
Slot 1