Canon EOS C500 Mark II Instruction Manual page 188

Menu Options
[ Assignable Buttons] menu
Following are the default settings for each assignable button. For a complete list of the functions that can be
assigned, refer to the detailed table (A 120).
188
Menu item
[Camera]
[Camera Grip]
[LCD LM-V1/V2]
[REMOTE A/B]
[Exp. Unit EU-V2]
[EVF-V70]
[Grip SG-1]
[B System Setup] menu
Menu item
[Reset]
/
[Transfer Menu/ ]
[Save]
[Load]
[Time Zone]
[Date/Time]
[Date Format]
H
[Language ]
[REMOTE Term.]
[HDMI Max Res.]
[Linked to HDMI Monitor]
[SDI OUT Output]
[MON. Output Resolution]
[3G-SDI Mapping]
[MON./HDMI Scan Mode]
[G-LOCK/SYNC Term.]
2
[Genlock Adjustment]
[SYNC Scan Mode]
[Time Code Mode]
[Time Code Run]
[Time Code DF/NDF]
1: [Magn.: VIDEO Term.], 2: [Peaking: All], 3: [Zebra: All], 4: [WFM: All], 5: [LUT: All],
6: [ISO/Gain], 7: [Shutter], 8: [Slow & Fast Motion], 9: [Slow & Fast Frame Rate],
10: [White Balance], 11: [Set White Balance], 12: [FUNC], 13: [Audio Status],
14: [Push Auto Iris], 15: [One-Shot AF]
1: [Focus Guide]
1: [FUNC], 2: [DISP]
1: [Magn.: VIDEO Term.], 2: [Peaking: All], 3: [Zebra: All], 4: [WFM: All]
1: [FUNC]
1: [FUNC], 2: [EVF-V70 Setup], 3: [Magn.: VIDEO Term.], 4: [False Color: VIDEO Term.]
1: [One-Shot AF]
[All Settings], [Assignable Buttons]
These settings reset the following camera settings to default values/settings.
[All Settings]: All the camera's settings except for the hour meter.
[Assignable Buttons]: Only the assignable buttons.
[To Camera], [To SD Card]
[From Camera], [From SD Card]
List of world time zones.
[UTC-05:00 New York] or [UTC+01:00 Central Europe]
–
[YMD], [YMD/24H], [MDY], [MDY/24H], [DMY], [DMY/24H]
[Deutsch], [English], [Español], [Français], [Italiano], [Polski], [Português],
[ ], [
[RC-V100 (REMOTE A)], [RC-V100 (REMOTE B)]
[4096x2160 / 3840x2160], [1920x1080], [1280x720]
[On], [Off]
[On], [Off]
[2048x1080 / 1920x1080], [1920x1080], [1280x720]
[Level A], [Level B]
[P], [PsF (Forced 1080i)]
2
[HD Sync Output], [Genlock Input]
–1023 to +1023 (000)
The phase difference between the external Genlock signal and the camera is initially set to 0. This setting
allows you to adjust it within the range of approx. ±0.4 H (–1023 to 1023). To set a 4-digit adjustment
value, set the first field to 10 or –10.
[P], [PsF]
[Preset], [Regen.]
[Rec Run], [Free Run]
[DF], [NDF]
Setting options and additional information
Setting options and additional information
], [ ], [ ]
2
, [Standard]
1
1
(A 130)
(A 33)
(A 33)
(A 33)
(A 118)
(A 144)
(A 144)
(A 143)
(A 144)
(A 143, 144)
(A 145)
(A 97, 98)
(A 97)
(A 98)
(A 93)
(A 93)
(A 94)