Canon EOS C500 Mark II Instruction Manual page 16

Names of Parts
16
1
2
3
4
5
6
7
8
9
1 Expansion unit connector
For connecting the optional EVF-V50 OLED
Electronic Viewfinder, EU-V1 Expansion Unit 1 or
EU-V2 Expansion Unit 2.
2 Expansion unit connector cover
3 Power indicator/Rear tally lamp (A 51)
4 FUNC (main functions) button (A 66)/
Assignable button Camera 12 (A 119)
5 Joystick (A 34)
6 CANCEL button (A 34)
7 MENU button (A 34, 119)
8 Screw holes for M4 bolts (7.5 mm (0.30 in.) deep,
x4)
9 Battery compartment (A 26)
10 MON. terminal (A 143, 144)
11 SDI OUT terminal (A 143)
Removing and attaching the terminal covers
You can remove the covers of the camera's terminals to access them more easily. To remove a terminal's
cover, open the cover and gently pull it straight out. To attach back the terminal cover, insert the connecting
strip into the opening.
NOTES
• If the connecting strip is difficult to grasp, use a pair of tweezers or similar tool.
10
11
12
20
12 TIME CODE terminal (A 96, 97)
13 REMOTE A terminal (A 118)
For connecting the optional RC-V100 Remote
Controller or commercially available remote
controllers.
14 HDMI OUT terminal (A 143, 144)
15 MIC (microphone) terminal (A 102)
16 × (headphone) terminal (A 106)
17 INPUT terminals (XLR): INPUT 1 (top), INPUT 2
(bottom) (A 102)
18 AUDIO STATUS (display the [¡ Audio Setup]
status screens) button (A 195)/
Assignable button Camera 13 (A 119)
19 DC IN 12V terminal (A 27)
20 BATTERY RELEASE button (A 26)
13
14
15
16
17
18
19