Canon EOS C500 Mark II Instruction Manual page 181

[Æ Recording/Media Setup] menu
Menu item
[Initialize Media]
[CFexpress A], [CFexpress B],
[SD Card]
[Sensor Mode]
[Main Rec Format]
[System Frequency]
[Recording Mode]
[Slow & Fast Frame Rate]
[Sub Rec Format]
[Resolution/Color Sampling]
[Frame Rate]
[Relay Recording],
[Double Slot Recording]
[Metadata]
[Camera Index]
[Reel Number], [Clip Number]
[User Defined]
[Scene], [Take]
[Lens Squeeze]
[Setting]
[User Memo]
[Country Code], [Organization],
[User Code]
[Add / File]
[Clip Numbering]
[Rec Command]
[HDMI Time Code]
Setting options and additional information
[Cancel], [OK]
[Full Frame], [Super 35mm (Cropped)], [Super 16mm (Cropped)]
[RAW], [XF-AVC]
1
[59.94 Hz], [50.00 Hz] , [24.00 Hz]
[Normal Recording], [Slow & Fast Motion], [Pre-Recording]
1 to 120
Available options and default value vary depending on other settings. See the tables on the reference
page.
[XF-AVC (SD Card)], [Off]
When [Main Rec Format] is set to [XF-AVC]:
[4096x2160 YCC422 10 bit], [3840x2160 YCC422 10 bit], [2048x1080 YCC422 10 bit],
[1920x1080 YCC422 10 bit]
When [Main Rec Format] is set to [RAW]:
[5952x3140], [4096x2160], [2048x1080]
For RAW clips, the color bit depth is determined by the frame rate used.
When [System Frequency] is set to [59.94 Hz]:
1
[59.94i]*, [59.94P] , [29.97P], [23.98P]
When [System Frequency] is set to [50.00 Hz]:
1
[50.00i]*, [50.00P] , [25.00P]
When [System Frequency] is set to [24.00 Hz]:
[24.00P]
* XF-AVC clips only. Not available when slow & fast motion recording is activated.
[On], [Off]
[A] to [Z]
[001] to [999]
User defined string up to 5 characters ([CANON])
Scene description up to 16 characters / Take description up to 8 characters
[x2.0], [x1.3], [Off]
[Remote], [SD Card]
[Off], list of user memo files available on the SD card
Identifiers up to 4 characters ([00__] default for [Organization] only)
[Country Code]: This identifier is the country code defined by ISO-3166-1 and is to be entered starting
from the left.
[Organization]: This identifier represents the organization that owns or operates the camera and can be
obtained by registering with the SMPTE Registration Authority. If the organization is not registered,
enter [0000].
[User Code]: This identifier designates the user. Leave this blank if [Organization] is set to [0000].
[On], [Off]
[Reset], [Continuous]
[On], [Off]
When this setting is [On] and you connect the camera to an external recorder, if you start or stop recording
with the camera, the external recorder will also start or stop recording. To output the recording command
from the HDMI OUT terminal, you will need to set also [HDMI Time Code] to [On].
[On], [Off]
Menu Options
(A 46) 181
(A 62)
(A 62)
(A 62)
(A 114)
(A 114)
(A 65)
(A 62)
(A 63)
(A 47)
(A 59)
(A 59)
(A 60)
(A 112)
(A 117)
(A 111, 177)
(A 111)
(A 125)
(A 60)
(A 144)