Canon EOS C500 Mark II Instruction Manual page 165

• User settings and the HTTP port number are the same as those set using the wizard (A 159).
• You can select [Port No. (HTTP)] or [Port No. (HTTPS)] to change the port numbers used for each
connection. Using the default port numbers (HTTP: 80, HTTPS: 443) is recommended.
• To use an HTTPS connection, select [HTTPS] > [Enable].
To use a secure HTTPS connection, use a Camera Access Point connection setting and connect the
network device to the camera using a normal HTTP connection (A 172) and download the necessary
certificate from the Browser Remote's settings tab (A 177). After you import the certificate you
downloaded to your Web browser, you will be able to use a secure HTTPS connection.
Individual settings available for manual change (communication settings)
Menu item
[Wi-Fi]
[TCP/IPv4]
[IP Address Settings]*
[DNS Server]
[DNS Address]*, [IP Address]*,
[Subnet Mask]*, [Gateway]*
[TCP/IPv6]
[TCP/IPv6 Settings]*
[Manual Setting]
[DNS Server]
[DNS Address],
[Manual Address],
[Prefix Length], [Gateway]
Individual settings available for manual change (function settings)
Menu item
[FTP Transfer]
[Destination Server]
[Server]*, [Port No.]*
[User Name/Password]
[User Name]*,
[Password]*
[Destination Folder]*
[Dest. Folder Structure]
[Overwrite Files]
[Passive Mode]*
[New Folder by Date]
[Automatic Setting], [Manual Setting]
[Disable], [Auto Assign], [Manual Setting]
[Disable], [Enable]
[Disable], [Enable]
[Disable], [Auto Assign], [Manual Setting]
Enter the desired address using the data entry screen (
[Default], [Camera]
[Skip], [Save As (New Name)], [Overwrite]
Determines how to deal with files to be transferred when files with the same name already exists in the
destination folder.
[Skip]: The file will not be transferred.
[Save As (New Name)]: The file will be transferred and "_1" will be added to the end of the file name.
[Overwrite]: The file will be transferred, overwriting any file with the same name on the FTP server.
[Disable], [Enable]
[Enable], [Disable]
[Enable]: A new subfolder under the transfer destination folder "YYYYMMDD\HHMMSS" will be created for every
transfer operation.
[Disable]: All the files will be transferred to the folder specified for the [Destination Folder] setting.
Setting options and additional information
A
60).
Setting options and additional information
Configuring Connection Settings
165