Line Switch - HP 1650A Setting Up

- - - - - - - - - - - - - - - - - - - 1 1
Line Switch
Control
The line switch is on the rear panel You turn on the logic analyzer
by pressing the 1 on the rocker switch. Make sure the operating
system
dISC
is in the disc drive before you turn
It
on. If you forget
the dis-c. don't worry, you won't harm anything You will merely have
to repeat the turn-on procedure with the
disc
in the drive
display intensity to a different level that's more comfortable for you.
You do this by turning the INTENSITY control on the rear panel
Turning on the Instrument
2·3