Gettmg Power To The Instrument; Operating Environment; Ventilation - HP 1650A Setting Up

Getting Power to
the Instrument
Operating
Environment
Ventilation
The HP 1650Al51A comes with a a-wire power cable. When you
connect the cable to an AC appropriate power receptacle, a ground is
provided for the Instrument cabinet. The type of power cable you
receive with the instrument depends on your country.
I
WARNING
~
Th amid possible shock hazard. yuu must connect the
instrument to a properly grounded 3-wir€ receptacle.
You may operate your
lOgIC
analyzer
III
a normal lab or office
environment without any additional considerations, But don't block
its ventilation If you intend to use It in another type of
environment, you must not exceed certam limits" You can fmd these
Limits in the HP 1650A.i51A Reference :Manual.
You must provide an unrestricted airflow for the fan and ventilation
openings in the rear of the logic analyzer However, you may stack
the logic analyzer under, over, or m-between other instruments as
Long as the surfaces of the other instruments aren't needed for then-
ventilation
Getting Readv to Operate
1-7