Configuring The Camera - Motorola Avigilon H4M-MT-DCIL Installation Manual

1. Locate the two clips on the inner side of the bezel.
2. Place the bezel up against the mounting adapter with the clips slightly to the left of the bezel
mounting clips on the mounting adapter.
3. Rotate the bezel clockwise until it snaps into place.

Configuring the Camera

Once installed, use one of the following methods to configure the camera:
If you have the USB Wifi Adapter, you can access the mobile web interface to configure the camera.
l
For more information, see Avigilon USB Wi-Fi Adapter System User Guide.
If you have installed multiple cameras, you can use the Avigilon Camera Configuration Tool to
l
configure common settings. For more information, see the Avigilon Camera Configuration Tool User
Guide.
If the camera is connected to the Avigilon Control Center system, you can use the client software to
l
configure the camera. For more information, see the Avigilon Control Center Client User Guide.
If the camera is connected to a third-party network management system, you can configure the
l
camera's specialty features in the camera's web browser interface. For more information, see the
Avigilon High Definition H4 and H5 IP Camera Web Interface User Guide.
Configuring the Camera 18