Table of Contents
Advertisement
adapter.
The connection status LED indicator will turn on once a network link has been established.
2. Position the camera in the mounting adapter, reinserting the connected cable through the cable entry
hole.
3. Align the camera housing clips on the camera base to the camera attachment retainers on the
mounting adapter. Press the camera base into the mounting adapter. The camera base clicks into
place and is held securely.
Initializing a Camera Username and Password
Cameras manufactured after January 1, 2020, do not have a default username or password and will be in a
factory default state.
Important: You must create a user with administrator privileges before the camera is operational.
The first user can be created using any of the following methods:
Camera's Web Interface: enter the camera's IP address in a web browser to access the web
l
interface. If the camera is in the factory default state you will be redirected to the Add a new user
page to create the first user. For more information, see the Avigilon High Definition H4 and H5 IP
Camera Web Interface User Guide.
Camera Configuration Tool version 1.4.4 or later: cameras discovered in the factory default state will
l
be identified by
the Avigilon Camera Configuration Tool User Guide.
USB Wi-Fi Adapter: when connecting a camera in the factory default state, you will be redirected to
l
the Create Administrator User page to create the first user. For more information, see Avigilon USB
Wi-Fi Adapter System User Guide.
Initializing a Camera Username and Password
. Select the Admin Users tab to create the first user. For more information, see
14
Advertisement
Table of Contents
