Zooming And Focusing The Dome Camera; Configuring The Camera; Setting The Ip Address Using The Arp/Ping Method - Motorola Avigilon H5SL Series Installation Manual

1. Insert a microSD card into the camera.
CAUTION — Do not force the microSD card into the camera or you may damage the card
and the camera.
2. Access the camera's web interface to enable the onboard storage feature. For more information, see
the Avigilon High Definition H4 and H5 IP Camera Web Interface User Guide.
Zooming and Focusing the Dome Camera
Ensure this procedure is performed after the dome cover is installed so you can accommodate for the focus
shift caused by the dome bubble.
Note: If the H5SL-DO camera model is powered while the temperature is below -30 °C (-22 °F), the
zoom and focus may be disabled for the first 45 minutes while the camera warms up.
In the camera web browser interface or the Avigilon Control Center software, use the camera's Image
l
and Display settings to zoom and focus the camera.
a. Use the zoom buttons to zoom the camera in or out.
b. Click Auto Focus to focus the lens.
c. Use the focus near and far buttons to manually adjust the focus.

Configuring the Camera

Once installed, use one of the following methods to configure the camera:
If you have the USB Wifi Adapter, you can access the mobile web interface to configure the camera.
l
For more information, see Avigilon USB Wi-Fi Adapter System User Guide.
If you have installed multiple cameras, you can use the Avigilon Camera Configuration Tool to
l
configure common settings. For more information, see the Avigilon Camera Configuration Tool User
Guide.
If the camera is connected to the Avigilon Control Center system, you can use the client software to
l
configure the camera. For more information, see the Avigilon Control Center Client User Guide.
If the camera is connected to a third-party network management system, you can configure the
l
camera's specialty features in the camera's web browser interface. For more information, see the
Avigilon High Definition H4 and H5 IP Camera Web Interface User Guide.

Setting the IP Address Using the ARP/Ping Method

Complete the following steps to configure the camera to use a specific IP address:
Zooming and Focusing the Dome Camera 42