Preference Setup - Philips BDP9100/05 User Manual

[Speaker Setup]
Optimises the surround output for the connected
speaker system.
Option Description
[Layout]
• Activates the test tone for
speakers and subwoofer.
[Speaker • Sets the delay time for
Distance]
the subwoofer, centre
or rear speakers if they
are placed closer to the
listening position, so that
the sound output from
all speakers reach the
listening position at the
same time.
[Speaker • Sets the volume level
Volume]
of each speaker and
subwoofer to get the ideal
audio balance.
[Frequency] • Sets the speaker size for
[Front (L+R)], [Center]
and [Rear (L+R)].
• Selects
speakers that can produce
low frequency signal
below 120 Hz.
• Selects
if there is no speaker
connected.
• Selects subwoofer
or [Off].
• If the front speakers are
set to [Small], subwoofer
setting will be [On] and
cannot be changed.
• If the subwoofer is set to
[Off], the front speakers
settings will be [Large]
and cannot be changed.
Tip
•
The test tone is emitted from the speaker while
adjusting the volume level.
•
Allow 1ms setting for every 30cm distance between
the speaker and the listening position.
[Large] size for
[No Speaker]
[On]

Preference Setup

1
Press .
2
Select [Settings], then press OK.
3
Select [Preference Setup], then press B.
OSD Language
Video Setup
Parental Control
Audio Setup
Screen Saver
Preference Setup
Change PIN
EasyLink Setup
Advanced Setup Display Panel
Auto Standby
PBC
4
Select an option, then press OK.
5
Select a setting, then press OK.
• To return to the previous menu, press
BACK.
• To exit the menu, press
Note
•
See the explanations of the above options in the
following pages.
[OSD Language]
Selects the default on-screen menu language.
English
Off
Off
Normal
On
On
.
EN 31