Preference Setup - Philips BDP7500 User Manual

Note
Ensure that the audio format is supported by the disc
When [Bitstream] is selected, interactive audio like
button sound is muted.
[PCM Downsampling]
Set the sampling rate for PCM audio output from
[On] – PCM audio is down-sampled at 48kHz.
[Off] – For BD or DVD recorded in LPCM
without copyright protection, two-channel
audio signals up to 96 kHz are output as LPCM
signals with no conversion.
[Speaker Setup]
Optimize the surround output for the connected
speaker system.
[Speaker Setup ] – Activate the test tone for
the speakers and the subwoofer.
[Speaker Distance] – Set the delay time for
the speakers and the subwoofer if they are
placed closer to the listening position, so that
the sound output from all speakers reach the
listening position at the same time.
[Speaker Volume] – Set the volume level of
the speaker and the subwoofer to get the ideal
audio balance.
[Speaker Size]
Set the speaker size for the speakers and
the subwoofer.
Select [Large] size for speakers that can
produce low frequency signal below
120 Hz.
Select [No Speaker] if there is no
speaker connected.
If the front speakers are set to [Small],
subwoofer setting is [On] and cannot be
changed.
If the subwoofer is set to [Off], the front
speakers settings are [Large] and cannot
be changed.
Tip
The test tone is emitted from the speaker while adjusting
the volume level.
Allow 1ms setting for every 30cm distance between
the speaker and the listening position.

Preference Setup

1
Press .
2
Select [Settings], then press OK.
3
Select [Preference Setup], then press .
4
Select an option, then press OK.
5
Select a setting, then press OK.
To return to the previous menu, press
BACK.
To exit the menu, press
[Menu Language]
Select an on-screen menu language.
Note
If this product is connected to an HDMI CEC compliant
TV using a HDMI cable, it switches automatically to the
[Parental Control]
Restrict access to discs that are unsuitable for children.
These types of discs must be recorded with ratings.
To access, enter your last set password or '0000'.
Note
Rated discs above the level you set in [Parental Control]
require a password to be played.
The ratings are country-dependent. To allow all discs to
play, select '8' for DVD-video and BD-Video.
Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
[Screen Saver]
Turn on or off the screen saver mode. It helps to
protect the TV screen from being damaged due to
over exposure to static image for being too long.
[On] - Set the screen saver active after 10
[Off] - Disable screen saver mode.
[Change Password]
Set or change the password.
.
EN 19