Advertisement
5. If you are not using a PoE switch or router
with the DBA-1510P, plug the power
cable into the Power Receptor on the
access point.
6. Place the DBA-1510P onto the mounting
ring brackets. Lock the DBA-1510P
into place by rotating the DBA-1510P
clockwise.
Placement on a Desktop
1.
Attach the provided rubber feet to the
holes located on the back of the DBA-
1510P housing.
2. Plug the Ethernet cable into the LAN port
on the access point.
3. If you are not using a PoE switch or router
with the DBA-1510P, plug the power
cable into the Power Receptor on the
access point.
Additional Information
If you are encountering problems setting up
your network, please refer to the user manual
that can be obtained from the D-Link website. It
contains many more rules, charts, explanations,
and examples to help you get your network up
and running.
Additional help is available through our offices
listed at the back of the user manual or online.
To find out more about D-Link products or
marketing information, please visit the website
http://www.dlink.com.
Warranty Information
The Warranty information is available at http://
warranty.dlink.com/
5
Advertisement
