Table of Contents
Advertisement
3.
Connect the Ethernet cable and telephone
cable (optional) to the device.
Figure 6: Connecting the Cables
4.
Attach the DAP-2620 to the mounting
plate by snapping the device into place
onto the plate and use the Allen key and
screw to lock it in at the top.
Figure 7: Locking the Lock Plate
Reboot/Reset the Access Point
If necessary, the DAP-2620 can be manually
rebooted or reset to factory default settings.
Rebooting the device
Unplug the Ethernet cable to power off the
device and replug it to power it on again.
4
Resetting the device
Press and hold down the recessed reset
button at the bottom of the device between
6 to 15 seconds then release to reset the device
to its factory default settings.
Additional Information
For additional support, please refer to the
user manual, or visit your local D-Link support
website.
Advertisement
Table of Contents
