Table of Contents
Advertisement
Analogue Tuner settings
Auto search
Manual install
System Menu Options
Press OK on the remote control to start the automatic TV
channel search process and replace all previously stored
analogue TV channels. This process may take several minutes.
Use this setting only if the automatic install detected the wrong
tuner signals.
{ Entry mode } – Select manual search based on channel
allocation or frequency entry
{ CH (channel), S-CH (specifi ed hyperband
channel), MHz (frequency) }, then press
OK.
{ Entry }
– Use the alphanumeric keypad 0-9 to
enter the frequency value or the channel
number, then press OK and the Green
button for { Store }.
OR
– Press the Blue button on the remote
control for { Search }, once you have
found the correct frequency/channel, press
the Green button for { Store }.
{ Preset }
– Use the alphanumeric keypad 0-9 to
enter the preset number for the channel to
store (e.g. '01'), press OK and the Green
button for { Store }.
{ Preset name } – Use the alphanumeric keypad 0-9 to
enter the preset channel name, press OK
and the Green button for { Store }. All
channels can have a name of up to four
characters.
{ TV system }
– Select the colour system that matches the
connected TV. It enables playback of a
different type of disc (PAL or NTSC disc)
on this unit.
(continued)
75
Advertisement
Table of Contents
