Table of Contents
Advertisement
Viewing live TV
PAUSE LIVE TV
SUBTITLE
INFO
SELECT
EDIT
A
Turn on the TV. If necessary, switch the
TV to the correct input channel for
viewing the recorder's playback.
Press STANDBY-ON 2 to turn on
B
this recorder.
You should see the TV programme on
the TV. If not, press LIVE TV.
+
−
C
Press P
/
to select a desired channel.
The TV programme you are tuned to
is automatically stored in the Time Shift
Buffer. This allows you to pause the live
TV and resume playback at any time.
If you switch to another TV channel on
the recorder, a new title will be created
and a vertical line will be shown on the
Time Shift video bar.
You can choose to display or hide the
Time Shift video bar by pressing the
INFO on the remote control.
Control TV Programmes
AUDIO
G-
CODE
Live
About Time Shift Buffer -
temporary HDD storage
The current TV programme will be
stored in the temporary hard disk
storage called 'TSB' (Time Shift Buffer)
once the recorder is turned on. It
continuously stores up to 6 (six) hours of
TV programmes.
The Time Shift video bar indicates the
status and timing of the stored TV
programmes.
22:04:30
1
2
3
The Time Shift video bar consists of the
following information:
a
The TV programme start time.
Once it has exceeded 6 (six) hours, the
start time will be changed accordingly.
b
Clips that are selected to be recorded
onto the hard disk (marked Red).
c
Title markers (when you switch to a TV
channel for more than 2 minutes, a new
title marker will be created).
d
Current position and time of the TV
programme broadcast.
e
Present time
Helpful Hint:
– The Time Shift Buffer stores and retains
up to the last 6 (six) hours of TV
programmes when the recorder is turned on.
If you switch the recorder to standby mode,
all the contents in the Time Shift Buffer will
be cleared.
Now
4
5
21
Advertisement
Table of Contents
