Table of Contents
Advertisement
Record TV Programme
About timer recording
Use the timer recording to automatically
start and stop a recording at a later date/
time. This recorder tunes to the right
programme channel and begins recording
at the specifi ed time.
With this recorder, you can schedule up
to 40 recordings at a time and up to 6
(six) hours for each recording. During
timer recording, changing the recorder's
channel is not possible.
Note: If the scheduled timer recording
is longer than 6 (six) hours, it splits into
two or more titles.
There are two ways to program a
timer recording
– Using the G-
CODE
– Using manual timer programming
OK
PAUSE LIVE TV
TIMER
G-
SUBTITLE
AUDIO
INFO
SELECT
EDIT
G-
CODE
32
(continued)
system
CODE
Timer recording (G-
system)
This is a simple timer programming
system. To use it, enter the G-
programme numbers associated with
your television programme. You can fi nd
this number in your TV listings magazine.
A
Turn on the TV to the correct viewing
channel for the recorder.
B
Press G-
on the remote control.
CODE
The G-
entry menu appears.
CODE
G-
System
CODE
Enter G-
number :
CODE
Clear
Store
C
Use the alphanumeric keypad 0-9 to
enter the G-
programme numbers
CODE
(e.g. 5-312-4 or 5,312 4, key in '53124').
To clear the programme number, press
the Red button for { Clear }.
To cancel the programming and exit the
menu, press the Yellow button for
{ Cancel }.
D
To confi rm your entry, press the Green
button for { Store }.
A message to enter channel list
appears.
CODE
CODE
Cancel
Advertisement
Table of Contents
