Connecting To A Camcorder; Option 1: Using The Dv In Socket; Option 2: Using The Video In Socket - Philips DVDR5590H/75 User Manual

Step 2: Optional Connections
Option 1

Connecting to a camcorder

You can use the front sockets to copy
camcorder recordings. These sockets are
located behind the fl ap on the right hand
side which provides convenient
connections.

Option 1: Using the DV IN socket

Use this connection if you have a Digital
Video or Digital 8 camcorder. The DV
socket conforms to the i.LINK standard.
It provides the best picture quality.
A
Connect an i.LINK 4-pin cable (not
supplied) from the DV IN socket on the
recorder to the appropriate DV OUT
socket on the camcorder.
B
Press CAM on the remote control to
select 'CAM2'.
Helpful Hint:
– It is not possible to record from this
recorder to your camcorder via the DV IN
socket on your recorder.
18
(continued)
Option 2: Using the VIDEO In
socket
Use the VIDEO connection if your
camcorder has only a single video output
(Composite Video, CVBS). It provides
good picture quality.
A
Connect the VIDEO socket at the front
panel of the recorder to the
corresponding S-VHS or Video output
socket on the camcorder.
B
Connect the AUDIO L/R sockets at the
front panel of the recorder to the audio
output socket on the camcorder.
C
Press CAM on the remote control
followed by P +/- repeatedly to select
'CAM1'.
Option 2