Agilent Technologies E5071C ENA Series Installation Manual page 41

Step 6. Select
Figure 3-1 Activate Acronis Startup Recovery Manager
e5071cse1079
Step 7. A confirmation dialog box is displayed. Push the enter to select
the factory backup. The recovery takes a few minutes depending on the amount of data.
Figure 3-2 Recover Factory Backup
e5071cse1034
Step 8. When the recovery is finished, push the enter select OK. The E5071C restarts
automatically.
Step 9. After restart, the screen for initial registration appears. Execute initial registration. For
information on the execution procedure, refer to "Initial Registration of E5071C" on
page 27.
Step 10. Execute the calibration of the touch screen. For information on the execution procedure,
refer to "Calibration of the Touch Screen" on page 29.
Chapter 3
.
Restore
Troubleshooting
System Recovery
to start the recovery of
Yes
35