Advertisement
Quick Links
I I
N N
F F
O O
R R
M M
A A
T T
I I
O O
N N
I
N
F
O
R
M
A
T
I
O
N
S E R V I C E
E5071C ENA Series Network Analyzer, 9 kHz to 8.5 GHz
Serial Numbers: MY46100001 and above
When replacing Inverter Board and LCD, fasten the TORX T15 screws using a
torque screwdriver (set to 1.02 N-m / 9.0 lb-in).
Parts Required: see solution
ADMINISTRATIVE INFORMATION
SERVICE NOTE CLASSIFICATION:
AUTHOR: jm
PRODUCT LINE: WN
ADDITIONAL INFORMATION:
© AGILENT TECHNOLOGIES, INC. 2007
PRINTED IN U.S.A.
June 6, 2007
O O
N N
L L
Y Y
O
N
L
Y
INFORMATION ONLY
E5071C-01
N O T E
Supersedes:
Page 1 of 2
None
Advertisement
Related Manuals for Agilent Technologies E5071C ENA Series
Summary of Contents for Agilent Technologies E5071C ENA Series
- Page 1 N O T E Supersedes: None E5071C ENA Series Network Analyzer, 9 kHz to 8.5 GHz Serial Numbers: MY46100001 and above When replacing Inverter Board and LCD, fasten the TORX T15 screws using a torque screwdriver (set to 1.02 N-m / 9.0 lb-in).
- Page 2 Page 2 of 2 E5071C-01 Situation: When replacing the Inverter Board and LCD, no torque info is shown in the service guide. If you fasten the screw with over the appropriate torque, A51 LCD might be damaged, and if you fasten the screw with under the appropriate torque, LCD module might not be fixed against the vibration.