Problem
Display screen shows: NO PHONE
CONNECTED
Or the system says
"There's no bluetooth phone connected"
Display screen shows: PHONE
DISCONNECTED
Display screen shows: PAIRING FAILED
Or the system says "Pairing failed.
Please try again"
TROUBLESHOOTING
Probable Cause
❍ The paired mobile phone is turned off
❍ The paired mobile phone is not
within range of the system
(the mobile phone should be located
within approximately 10 m of the
system)
❍ Bluetooth
®
wireless technology
connection has been disabled on your
mobile phone ("Blue&Me" ID)
❍ A technical error occurred
with the mobile phone
Bluetooth
wireless technology
®
capabilities
❍ During an ongoing phone
conversation, the mobile phone
was taken out of the system range
❍ A technical error occurred during the
pairing procedure
Possible Solution
❍ Turn the paired mobile phone on
❍ Make sure that your phone is paired
❍ Make sure that the Bluetooth
wireless technology connection on
your mobile phone is enabled
("Blue&Me" or ID)
❍ Make sure that the mobile phone you
paired with the system is within
range
❍ Reset Blue&Me™ Nav by turning
the mobile phone off and on
❍ Reset Blue&Me™ Nav by turning
the ignition key to STOP and then to
MAR again
❍ Verify the correct PIN number, and try
entering it again
❍ Reset the mobile phone by turning it
off and on, and then retry the pairing
procedure
SETTING FUNCTIONS -
PAIRING YOUR MOBILE PHONE
91
®
15