Advanced Options; Accessing The Device Id; Changing The Gprs Code - Alfa Romeo MiTo Blue&Me Nav Manual

ADVANCED OPTIONS

?
To navigate to the ADVANCED OPTIONS,
menu using manual interaction, proceed
as follows:
Press ß /MENU to open the Main
Menu then select SETTINGS by pressing
SRC/OK or ß /MENU.
Select ADVANCED OPTIONS and then
press SRC/OK or /MENU.
ß
}
Or, using voice interaction:
Press ' , pronounce "Settings" and
then "Advanced Options".
Within the ADVANCED OPTIONS menu
you can access the SYSTEM CODE.
Note
This code is an 8-digit number (device ID)
which uniquely identifies the Blue&Me™
Nav system installed on your car and can-
not be changed.
SETTINGS FUNCTIONS

Accessing the device ID

For certain operations, it might be necessary
to know the Blue&Me™ Nav system
code.
?
To access the system code by manual
interaction, proceed as follows:
Select SYSTEM CODE and then press
SRC/OK or ß /MENU.
The instrument panel display will show
your Blue&Me™ Nav system code.
Press SRC/OK or /MENU or
ß
&
/ESC to quit.
}
Or, using voice interaction:
Press , pronounce "Settings", wait
'
shortly for feedback and then pronounce
"Device ID".
The instrument panel display will show
your Blue&Me™ Nav system code.
Press SRC/OK or ß /MENU or
&
/ESC to quit.

Changing the GPRS code

If your mobile phone carrier requires to
change the GPRS code, you can perform this
operation via the ADVANCED OPTIONS
menu.
?
To change the GPRS code using manu-
al interaction, proceed as follows:
Go to the GPRS CODE menu and press
SRC/OK or /MENU.
ß
The display will show GPRS:, and a list
of digits (1, 2, 3, 4, 5, 6, 7, 8, 9),
DEFAULT, and DISABLE. To select the
new GPRS code, press N and O until
choosing the required option, then press
SRC/OK or ß /MENU. To store the
default value, select DEFAULT. To disable
the connection code, select DISABLE.
After setting the new GPRS code,
Blue&Me™ Nav will display the
message GPRS CODE.
73
1