Vehicle Position; Route Simulation - Alfa Romeo MiTo Blue&Me Nav Manual

66 66
?
Cith manual interaction, proceed as fol-
lows:
Select the RESTORE SETTINGS option by
pressing SRC/OK or ß /MENU.
Select YES or NO using the "N" or
"O" keys and press SRC/OK or
ß /MENU to confirm.
}
Or with voice interaction:
Press and say "Restore settings".
'
Blue&Me™ Nav will ask you
whether you wish to restore the initial
factory settings by means of voice syn-
thesis. Answer "Yes" to proceed, "No"
to keep the current settings.

Vehicle position

This function allows you to find out the car's
exact position expressed as a latitude
(North/South) and longitude (East/West),
shown on the reconfigurable multifunction
display. This function also provides informa-
tion on the number of GPS satellites received
by the Blue&Me™ Nav.
FUNCTIONS OF THE NAVIGATION SYSTEM
?
To find out the vehicle's GPS position
with manual interaction:
Activate the main Menu, select the NAV-
IGATION option and then press
SRC/OK or
Select the VEHICLE POSITION option and
press SRC/OK or
play the required data.
}
Or with voice interaction:
Press and say "Navigation". Once
'
you have heard the system message,
say "VEHICLE
Blue&Me™ Nav will display the re-
quired information.

Route simulation

Blue&Me™ Nav uses this function to
display a simulation of the calculated route.
For road safety reasons, it is
only possible to enter a new
destination with the car at a
standstill.
Note
To carry out a simulation, navigation towards
a destination must be in progress. A destina-
tion must therefore have been set and the
route must have been successfully calculat-
ß /MENU.
ed.
?
ß /MENU to dis-
POSITION".
}
To simulate the active route, by means
ofmanual interaction:
Activate the main Menu, select the NAV-
IGATION option and then press
SRC/OK or /MENU.
ß
Select the ROUTE SIMULATION option
and press SRC/OK or /MENU to
ß
start the simulation.
To stop the simulation, simply press the
NAV key on the keypad near the cour-
tesy light.
Or with voice interaction:
Press ' and say "Navigation". Once
you have heard the system message, say
"Route simulation". Blue&Me™ Nav
will start the simulation.
To stop the simulation, press
say "Navigation"
and
'