Set Tolls; Dictate Destination; Poi Alert - Alfa Romeo MiTo Blue&Me Nav Manual

64 64

❍ Set tolls

Use this setting to tell Blue&Me™ Nav
whether you wish to include sections of road
that require payment of a toll in the route
calculation.
?
With manual interaction, proceed as fol-
lows:
Select the SET TOLLS option by pressing
SRC/OK or /MENU.
ß
Select YES or NO using the "N" or
"O" keys and press SRC/OK or
/MENU to confirm.
ß
}
Or with voice interaction:
Press ' and say "Set tolls".
Blue&Me™ Nav will tell you the cur-
rent setting using voice synthesis and
will ask you if you wish to change it. An-
swer "Yes" to change the option, "No"
to maintain the current setting.
FUNCTIONS OF THE NAVIGATION SYSTEM

❍ Dictate destination

Use this setting to set your preference for
voice completion during destination input. if
you wish to set DICTATE DESTINATION to NO,
the destination will be entered in exclusive-
ly manual mode. It will not therefore be pos-
sible to complete the town/city or road
name by voice.
?
With manual interaction, proceed as fol-
lows:
Select the DICTATE DESTINATION option
by pressing SRC/OK or
Select YES or NO using the "N" or "O"
keys and press SRC/OK or
to confirm.
}
Or with voice interaction:
Press and say "Dictate destination".
'
Blue&Me™ Nav will tell you the cur-
rent setting using voice synthesis and
will ask you if you wish to change it. An-
swer "Yes" to change the option, "No"
to maintain the current setting.
Note
It may be useful to disable the dictate des-
tination function if the map used contains
information in a language other than that
set for voice
Blue&Me™ Nav system.
For further information, consult the
"PROBLEM SOLVING – NAVIGATION SYS-
TEM"

POI Alert

/MENU.
ß This Blue&Me™ Nav option allows to se-
lect one or more POI categories and receive
a message when you are about to approach
/MENU
ß
them.
?
With manual interaction, follow the in-
structions below:
Select POI ALERT and push SRC/OK
or ß /MENU.
The system will ask to set the Points of in-
terest categories and the distance where the
nearness alert is to be set on the following
menu:
SELECT POI
SELECT DISTANCE
recognition in the