Advertisement
How to load paper
1
Open the Bypass Tray.
NOTICE
Be careful not to touch the surface of the Paper Feed
Rollers with your hand.
2
Load paper into the tray with the print side facing
down.
% Insert paper into the tray until their edges are
pressed against the back.
NOTICE
Do not load an excessive number of sheets such that the
top of the stack is higher than the
If paper is curled, flatten it before loading it.
3
Slide the Lateral Guide to fit the size of the loaded
paper.
4
Specify the paper type and paper size.
% For details on how to specify the paper type and
paper size, refer to the HTML User's Guide.
bizhub C4000i/C3300i
,
mark.
6.1.3
Loading envelopes
Precautions when using envelopes
-
Remove air from the envelope(s), and securely
press along the flap fold line.
-
Do not use envelopes that have glue or release pa-
per on the flap or the part covered by the flap on the
body.
-
The flap side of envelopes cannot be printed on.
-
When loading envelopes with flaps opened, also
select the standard size that matches them. You do
not have to measure the size of the envelope with
the flap opened to set the size as a custom-sized
envelope.
For Tray 1
Up to 30 envelopes can be loaded into the tray.
-
Load envelopes with the flap part facing down.
-
Align the Lateral Guide with the envelope size.
-
Select the desired envelope size from [Envelop/4 e
6] ([Envelop/A6 Card]) of [Paper Size].
6
21
Hide quick links:
Advertisement
