Rear Panel; Hardware Installation - NETGEAR RM356 RM356 RM356 Installation Manual

Rear Panel

Refer to this diagram to identify all of the ports on the router when you attempt to make any
connections. The Model RM356 router has four UTP LAN ports for connecting to PCs or hubs
and a Manager port for connecting to a management terminal (optional). The line port connects to
your phone jack, and the phone port allows a phone or fax machine to share the phone line with
the router.
AC adapter outlet
16VAC
4 3
Rear Panel of the Model RM356 Modem Router

Hardware Installation

Hardware Installation
Refer to the following illustration for installing and connecting your Model RM356 Modem
Router. Configuration by FirstGear is performed from a PC attached to a LAN port. The network
manager terminal is only necessary for installing software upgrades.
16VAC
4 3
AC power
adapter
PCs
or hubs
Installing the Model RM356 Modem Router
Model RM356 Modem Router Installation Guide
LAN
MANAGER
2 1
UTP LAN RJ-45
ports Manager port
connection
LAN
MANAGER
2 1
Network
manager
(optional)
Line port
LINE PHONE
Phone
port
8605FA
Wall
LINE PHONE 1
Phone or other
analog devices
8623FA