HP D Series Upgrade Manual page 33

D. Halt the Boot
If Autoboot is set to ON, you will have to interrupt the boot process to get to the
Process
Boot Console Handler, where you will have access to the commands for verifying
the memory installation.When prompted by the following message, halt the boot
process by pressing any key on the keyboard
Processor is booting from first available device.
To discontinue, press any key within 10 seconds.
Boot terminated.
-- Main Menu -------------------------------------------------
Command
-----------
BOot [PRI|ALT|<path>]
PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>]
TOC
COnfiguration [<command>]
INformation [<command>]
SERvice [<command>]
DIsplay
HElp [<menu>|<command>]
RESET
-------
Main Menu: Enter command >
Memory Upgrade Verification Procedure
Description
---------------------
Boot from specified path
Search for boot devices
Soft boot the system
Access Configuration menu/commands
Access Information menu/commands
Access Service menu/commands
Redisplay the current menu
Display help for menu or command
Restart the system
D Class System Memory Upgrade
1- 27