Table of Contents
Advertisement
Assembly
Step 1:
Hardware used: Short bolt (B) x3, Bolt C x3
Attach the gas cylinder brackets (5) to the base plate (6).
Align the gas cylinder brackets with the eyelets in the base plate surrounding the large center hole.
Fasten the gas cylinder brackets to the base plate using 3 short bolts (B).
Turn the vertical portion of the brackets toward the middle of the base plate.
Tighten the short bolts using a wrench (H).
Insert 3 long bolts (C) into the nuts welded onto the gas cylinder brackets eyelets. Do not tighten the long bolts
completely (this will be done in step 13 when securing the gas cylinder).
Step 2:
Hardware used: Bolt A x8
7
•
Attach 2 wheels (7) to the base plate (6) with 8 bolts (A).
•
Pay attention to the direction of the wheels when attaching. Make sure the wheel brackets point towards the upper
side of the base plate (the side where the gas cylinder brackets are attached).
•
For easy access, turn the base plate over before attaching the wheels.
H
A
9
Advertisement
Table of Contents
