Table of Contents
Advertisement
Assembly
Step 7:
10
WARNING
The black silicone ring (11) must be in place around the lower rim of the flame tube (12) prior to
operating the product.
•
Place the black silicone ring.
•
Carefully install the flame tube by guiding it up.
•
Insert the upper end through the center hole in the plate of the emitter (13).
•
Do not force the tube.
•
Slide the flame tube into place and settle it into the hole of the middle plate (10).
•
Ensure that the tube is positioned properly to completely cover the center hole of the middle plate.
13
12
11
13
Advertisement
Table of Contents
